Monday, September 16, 2019

Environment, Geographical Location, and its Affects on The Early River-Valley Essay

Food, shelter, fertile land, and trade were essential for early river-valley civilizations. Without food, shelter, fertile land, and trade early river-valleys where doomed for any future success in the land. Egypt, Mesopotamia, and the Indus Valley are examples of some early river-valley civilizations that relied heavily on its geographies and Mother Nature. For early river-valley civilizations in Egypt the Nile River played a crucial role. Without the Nile, Egypt would be a bleak and hospitable desert filled with mountains, and rocks. The Nile provided water for the people of Egypt. With the Nile being really the only source of water for all of Egypt, I would imagine that these civilizations cherished the Nile heavily. The Nile also, helped the farming in Egypt improve. Every September, the Nile, overflowed its banks, spreading water out into the bordering depressed basins. When the waters receded, they left behind a fertile layer of mineral-rich silt, and the farmers could easily plant their crops in the moist soil. The early river-valley civilizations of Mesopotamia relied greatly on the Tigris, and the Euphrates Rivers. Mesopotamia means, â€Å"Land between the rivers.† Mesopotamian civilization developed in the plain alongside and between the Tigris and Euphrates, which originate in the mountains of eastern Anatolia and empty into the Persian Gulf. Without the rivers, the civilizations would have struggled greatly to survive. Reed plants, which grew on the riverbanks and in the marshy southern delta, could easily be woven into mats, baskets, huts, and boats. Also, fish from the rivers and marshes were an important part of the people’s diet [http://search.targetwords.com/u.search?x=5977%7C1%7C%7C%7C%7Cdiet%7CAA1VDw]. Another benefit that the rivers gave to the early civilizations was that, herds of sheep, and goat which grazed on the fallow land provided wool, and milk. Finally, the early river-valley civilizations in the Indus Valley relied significantly on the Indus River. Twice a year the river overflows its banks and spreads for as much as 10 miles. In March and April melting snow would melt and feed the rivers. Then, in August, the great monsoon would blow off the ocean to bring rains that swell streams flowing into the Indus. As a result, farmers in this region of little rainfall were able to plant and harvest two crops a year. With a bad environment and a bad geographical location an early river-valley civilization didn’t have much of a chance surviving. Egypt, Mesopotamia, and the Indus Valley were some of the lucky locations where their environment and geographical location benefited them greatly. Egypt would have had barely any water, Mesopotamia wouldn’t have been able to trade, and the Indus Valley would have had been deserted without each locations geographical gift.

Sunday, September 15, 2019

International Language and Strategic Inventory Learning Language

Our universe has now become a planetary small town, the clip has long gone when it used to take several months to go from one terminal of the universe to the other, now distance is no more an issue and as distance has shortened the interaction between people from different civilizations and societies have become more frequent beef uping the communicating over the universe. When interacting with people from all over the universe, communicating barrier is faced due to difference in linguistic communication and since it is impractical to larn all the linguistic communications so we have one linguistic communication known as International Language i.e. English which is spoken and understood by a big bulk of people round the Earth. Although it is the female parent linguistic communication of really few states, it is taught and learned in the full universe since larning English has now become a necessity. Learning a new foreign linguistic communication may non be an easy occupation particu larly it requires a batch of forbearance and pattern but it can be made easier and the end can be achieved rapidly if the instruction manner is made harmonizing to the learning manner of an person and this is what Strategic Inventory Learning Language is all about. Learning of linguistic communication in the best manner can be done by first acknowledging our ain acquisition manner and so work on that form. Learning manners can be observed by an person or merely by the acquisition manner checklist. Largely our acquisition manners are developed at really early phases may be pre-school clip or early school life. I found out from the larning manner checklist that I am a Ocular Learner significance that my acquisition abilities are best with the assistance of images, graphs and images. I believe this is because from really get downing of my schooling my parents and instructors emphasized on learning me by demoing or making practical instead than merely reading to me or stating me about it. Normally our acquisition manners are at sub-conscious degree therefore before working to better larning abilities it is of import to acknowledge our manner. A scheme stock list for linguistic communication acquisition is formalized tool that answers the inquiry of what method is best for one peculiar scholar, or group of scholars, to larn a foreign linguistic communication. Harmonizing to the writer Strategic Inventory Learning Language is grouped into five schemes which are memory scheme, cognitive scheme, compensation scheme, meta-cognitive scheme, affectional scheme and societal scheme ( Griffiths and Parr, 251 ) . Normally we follow one or two of the schemes sub-consciously. To recognize our scheme we can detect our acquisition and analyzing wonts or merely make full the SILL inquirer. I found out that my sub-conscious SILL is Cognitive Strategies ; which is that I read for pleasance in English to increase my vocabulary and to guarantee speedy and right sentence formation, besides I try to happen forms in English which enables me to easy discourse in the linguistic communication. As from my larning manner I found that I am a ocular s cholar and so this explains my cognitive scheme that I prefer reading over listening to better my acquisition abilities, since reading helps me to do images of the words in my head moreover, by doing forms I easy retrieve what I have learned. I besides realized that if I have to larn something I do non declaim it several times it alternatively I prefer composing it few times as it helps me to retrieve better as I rapidly absorb the images of the words formed when I had written it down. After all the research about my ain learning manner and the schemes I have been following I feel that now I can expeditiously work upon rushing up my linguistic communication larning procedure and go an independent scholar. Another scheme which I feel I slightly follow is the Social Strategy that is I try to larn by interacting with people who I know have command in English, I besides try to discourse in English and utilize vocabulary in my conversation this is a practical attack towards larning and h ence builds up the assurance which is an of import factor. In future I plan to follow another scheme of SILL which is meta-cognitive i.e. pull offing ain acquisition accomplishments by maintaining a degree Celsius I have check and balance on my advancement and besides guarantee me about how much I have already learned. This scheme will besides enable me to schedule my clip in such a manner that I take out adequate clip to work on my linguistic communication accomplishments on routinely footing. Since I am good at retrieving things that by visual image and I already follow cognitive scheme hence, in order to follow this new scheme I will non hold to alter my acquisition manner hence it will necessitate less attempt and non much clip. Conscious working and acceptance of Strategic Inventory Learning Language will guarantee better acquisition of the linguistic communication in effortless and less clip. Strategic stock list larning linguistic communication is a really utile and efficient agencies to larn linguistic communication as it enables the scholar to larn in the manner that suits them best, this non merely rush up the acquisition procedure but besides develop assurance in the scholar. This strategic attack makes it easier for the scholar to accomplish the end and acquire bid on the linguistic communication. Hence, in order to link to the full universe and feel at easiness when interacting with people of different states holding different linguistic communications it is really of import to larn English and the best and quickest manner to accomplish this end is by following SILL schemes.

Saturday, September 14, 2019

Environmental Impact of Textile Production – Handloom Production Is the Answer

D. Narasimha Reddy 1/11 Environmental Impact of Mechanised and Automated Textile Production Introduction The contribution of mechanised and automated manufacturing to various environmental impacts is enormous. Environmental impacts from manufacturing industries can be seen such areas as toxic chemicals, waste, energy, and carbon emissions. Manufacturing in developed countries is also a heavy user of water, and there have been many cases of air, water and soil contamination which have led to such actions as cleanups, class actions suits and a variety of other corporate liabilities. Environmental impact can be seen in all phases of textile production and use, from growing or making fibres to discarding a product after its useful life has ended. The physical environment is affected by these processes, including resource depletion, pollution and energy use; the biological environment, by considering what happens as a result of manufacture, and the social environment as it impinges on our psychological, physical and physiological comfort, as well as our financial well-being. In recent years, textile industry in developed countries has been facing severe problems, the most serious of which are those connected with pollution. In fact, governments have been bringing up environmental laws which strictly prohibit wastewater discharge in rivers and lakes. This situation indeed burdens the textile industries and also leads to increase in production costs. Textile Industry and Process Description The textile industry includes multiple processes and activities. The four major textile operations are: †¢ †¢ †¢ †¢ Yarn Formation: preparing and spinning raw materials (natural and synthetic); texturizing man-made filament fibers. Fabric Formation: warping and slashing yarn; performing weaving and knitting operations. Wet Processing: preparing the fabric for dyeing and finishing; dyeing, printing, and finishing operations. Product Fabrication: cutting and sewing the fabric, performing final finishing operations. In the yarn formation process, fibers are bound using spinning operations, grouping, and twisting. Staple fibers, natural and man-made, are prepared for spinning through a combination of various processing steps such as blending, drawing, carding, opening, combing, and roving. Following drying operations, yarn may then be woven into fabric. From the spun or filament yarn, fabric is formed by knitting or weaving operations. Yarn e-mail: nreddy. [email  protected] com D. Narasimha Reddy 2/11 can be processed directly through knitting operations but typically requires preparation for weaving operations. Preparation for weaving includes warping and slashing (sizing). Wet processing enhances appearance, durability, and serviceability of the fabric. Chemical Pollution Textile production involves a number of wet processes that may use solvents. Emissions of volatile organic compounds (VOCs) mainly arise from textiles finishing, drying processes, and solvent use. VOC concentrations vary from 10 milligrams of carbon per cubic meter (mg/m3) for the thermosol process to 350 mg carbon/m3 for drying and condensation process. Waste water from processes is a major source of pollutants. It is typically alkaline and has high BOD5 (700 to 2,000 milligrams per liter (mg/L)) and chemical oxygen demand (COD) (approximately 2 to 5 times the biochemical oxygen demand (BOD) level), solids, oil and possibly toxic organics, including phenols (from dyeing and finishing) and halogenated organics (from processes such as bleaching). Dye effluents are frequently highly colored and may contain heavy metals such as copper and chromium. Pesticides used on natural fibers are transferred to effluents during washing and scouring operations. Pesticides are also used for moth proofing, brominated flame retardants for synthetic fabrics, and isocyanates for lamination. Effluents might include pesticides (such as DDT and PCP), and metals (such as mercury, arsenic, and copper). Air emissions include dust, oil mists, acid vapors, odors, and boiler exhausts. Cleaning and production changes result in sludges from tanks and spent process chemicals, which may contain toxic organics and metals. Table 1: Chemicals and Chemical Categories Commonly Encountered in Textile Manufacturing Process Chemicals and Chemical Categories Dyeing/Printing Ethylene glycol, ertain glycol ethers, methanol, copper compounds, chromium compounds Desizing Certain glycol ethers Sizing Methanol Scouring Biphenyl, xylene, certain glycol ethers Chemical Finishing Certain glycol ethers, methyl ethyl ketone, formaldehyde Coating Operations Dichloromethane, methanol, methyl ethyl ketone, toluene Article/Formulation Chromium compounds, copper compounds, methanol, Components antimony compounds Manufacturing/Processing Ethylene glycol, methanol, phenol, toluene, xylene, Aids biphenyl Reactants Diisocyanates, formaldehyde, methanol, phenol Source: Emergency Planning and Community Right- To-Know Act Section 313 Reporting Guidance for the Textile Processing Industry, US Environmental Protection Agency, May, 2000 Chemicals are used for the removal of impurities from the fiber and for machine maintenance. Man-made filament fibers may be manufactured using chemicals. e-mail: nreddy. [email  protected] com D. Narasimha Reddy 3/11 Processing of these fibers, known as texturizing, can result in the removal and subsequent release and other waste management activities of chemicals from the fiber. Oils, lubricants, machine maintenance chemicals, and waste yarn and material are also released. Chemical sizing agents are added to the yarn by solution or pad/dry techniques and other chemical additives may be added to increase yarn softness and pliability. Chemicals are also used during fabric formation as fabric processing agents and equipment cleaning and maintenance chemicals. Fabric processing agents include sizing agents and performance enhancing chemicals such as certain glycol ethers, ethylene glycol, and methanol. These chemicals typically volatilize or are washed off during fabric formation. However, some may remain with the fabric throughout the fabric formation process and into the wet processing and finishing operations. Both fugitive and point source air emissions containing chemicals typically occur during the slashing (sizing) operation or during fabric drying operations. This includes chemicals used as sizing agents or performance enhancing chemicals. Dust air emissions may also be generated during fabric formation. Effluents are generated from fabric cleaning and slashing operations; used oil, lubricants, and other machine maintenance chemicals; and equipment cleaning operations. Solid waste is also released from fabric formation. The primary source of solid waste is excess fabric material and scraps that may contain chemicals not volatilized or removed during fabric formation or chemicals brought on-site with the raw material (e. g. , antimony oxide used as a fire resistant). Dust containing chemicals is also generated during knitting or weaving operations, which when collected by air pollution control devices or by floor sweepings is a significant solid waste. During slashing operations, residue left in sizing agent or other chemical agent containers may be a source of chemicals. Fugitive emissions are most likely to result from slashing and drying operations when chemicals, such as methanol, evaporate. In wet processing, chemical agents, such as dyes, pigments, strength agents, and flame resistors are applied through a water-intensive process. Synthetic materials may be desized and scoured prior to dyeing or printing. After preparation for wet processing, dyeing or printing can occur, followed by rinsing, drying, or heat setting. Printing operations typically do not use water. The final wet processing step is mechanical and chemical finishing; these operations are used to improve appearance, texture, and performance of the fabric. Dye application includes various dye types and methods. Dyes can be fixed to the textile chemically and/or physically. Dyes may be bonded to the fabric or precipitated by removal of a dye solubilizing agent. Color can be affixed through the use of pigments, solvents, and resin binders. For the textile industry, wet processing operations are significant sources of chemical release. Typical chemicals include ammonia, certain glycol ethers, and methyl ethyl ketone. Alkaline or solvent solutions are used during scouring. Solvents, although used in the past, are being replaced with aqueous chemicals. Bleaching agents and other chemical e-mail: nreddy. [email  protected] com D. Narasimha Reddy 4/11 additives are used during bleaching operations, however, these are usually not chemicals. Acids are used for neutralizing remaining caustic soda during mercerizing operations. During dyeing or printing operations, chemicals such as solubilizing agents, dye carriers, salts, and fixing agents may be employed to speed the process or enhance the process effects. Chemicals used during finishing operations include optical brighteners, softeners, and flame resistant chemicals. Effluents are generated from spent process baths, solutions, and rinses. Process effluents include spent sizing solutions, scouring and dyeing baths, cleaning rinses, dyeing rinses, textile cleaning water, and mercerizing operations. Chemicals in textile effluents include dyes, pigments, and salts. Salts present in process effluents may be either raw materials (e. g. , metal compound salts) or byproducts from neutralization or other chemical reactions (e. g. , nitrate compounds). Metal compounds such as copper compounds and chromium compounds are also commonly present. Other sources include equipment cleaning wastewater, container cleaning wastewater, and used lubricants and other machine operating aids. Cleaning solvents may become part of the wastewater after scouring operations and equipment cleaning. The US EPA has estimated that there are approximately 135 major source facilities, in US, in the printing, coating, and dyeing of fabrics and other textiles source category. The principal hazardous air pollutants emitted by these sources include toluene, methyl ethyl ketone (MEK), methanol, xylenes, methyl isobutyl ketone (MIBK), methylene chloride, trichloroethylene, n- hexane, glycol ethers (ethylene glycol), and formaldehyde. Exposure to these substances has been demonstrated to cause adverse health effects such as irritation of the eye, lung, and mucous membranes, effects on the central nervous system, and damage to the liver. The EPA has classified two of the hazardous air pollutants, methylene chloride and trichloroethylene, as probable or possible human carcinogens. Dyeing The art of textile dyeing dates back thousands of years, when dyes extracted from plants or sea snails were used to color cloth. Today, most dyes are synthetically manufactured, yet only 40-90% actually resides on the cloth. The residual dye is treated and discharged into our rivers and streams. World wide, it is estimated that this accounts for over 400,000 tons of dye per year. Colorfastness is a textile industry standard that determines how stable the color is in a garment. Good colorfastness means the garment won’t fade after one washing. Resin pretreatment is done for garments that require excellent colorfastness. Cationic fixatives could be used for outerwear garments where colorfastness to washing is moderate but colorfastness to dry cleaning is high. Poor shade repeats are a major cause of economic loss and pollution in dyeing operations. An average dye worker makes 300 weighings per day. Sources of error are many, e-mail: nreddy. [email  protected] com D. Narasimha Reddy 5/11 including sorption of moisture from the atmosphere which way amout to up to a maximum of 20% error in dye weight. Other factors such as water quality, fiber variations, and the like also contribute to reworks and off quality. There needs to be a balance between improved productivity in dyeing, and the need to minimize water, energy, and effluent discharge in the textile industry. There is a need to regulate usage of dyes in improving shades on textiles while optimizing water, dye and energy utilization. Under most circumstances, a mixture of dyes is utilised to achieve the desired shade. This means that a small number of dyes can be used to achieve an infinite number of colours, but also means that achieving the exact shade desired requires some skill and can often entail redyeing with a shading addition to correct the shade. In extreme cases, the cloth can be stripped of colour and completely redyed, but this is an environmental and commercial last resort. One of the root causes of problems in achieving the required shade is that if dyes in a mixture have different dyeing profiles the shade and depth of dyeing may change with time and the timing of the dyeing process is therefore crucial. Thus, the difficulty associated with reliable attainment of shade and depth provides a hidden cost in production through reduced capacity and proportionately increases the environmental impact of reactive dyeing through the extra water, chemicals, energy and time needed to make a shading addition. Dyes and auxiliary chemicals used in textile mills are developed to be resistant to environmental influences. As a result, they are hard to remove from wastewater generated during the dyeing processes. In India, the detrimental nature of the synthetic dye industry has been recognised. The Central Pollution Control Board of India has included it in its â€Å"hyper-red† category reserved for the seventeen most polluting industries in the country. The true costs of synthetic dye production and application have never, to our knowledge, been assessed. According to the Tamil Nadu Pollution Control Board, an estimated 80. 70 million litres of effluent water is discharged daily into the Noyy al River from dyeing and bleaching units in Tirupur. 2 Water Consumption Water is used extensively throughout textile processing operations. Textile operations vary greatly in water consumption. Water use can vary widely between similar operations as well. Almost all dyes, specialty chemicals, and finishing chemicals are applied to textile substrates from water baths. In addition, most fabric preparation steps, including desizing, scouring, bleaching, and mercerizing, use aqueous systems. The amount of http://www. undp. org. in/Programme/Environment/natdye/dyejust. tm Zero Discharge – Treatment Options for Textile Dye Effluent: A Case Study at Manickapurampudur Common Effluent Treatment Plant, Tirupur, Tamil Nadu, S. Eswaramoorthi, K. Dhanapal1 and J. Karpagam EPIC in India, No. 33, Anugraha Gardens, Central Studio Road, Trichy Main Road, Singanallur, Coimbatore-641005, India, 2004. 2 1 e-mail: nreddy. [email  protected] com D. Narasimha Reddy 6/11 water used varies widely in the industry, depending on specific processes operated at the mill, equipment used, and prevailing management philosophy concerning water use. The various stages of textile production (from spinning, weaving and knitting, to dyeing and finishing) require enormous energy and water use. For example, 26. 5 gallons of water are needed to process 2. 2 pounds of textiles. Reducing water consumption in textile processing is important, due in part because excess water use dilutes pollutants and adds to the effluent load. Table 2: Water Use in Textile Processing Processing Water Use Water Use Subcategory Minimum, Median, gal/lb gal/lb of production of production Wool 13. 3 34. 1 Woven 0. 6 13. 6 Knit 2. 4 10. 0 Carpet 1. 0 5. 6 Stock/Yarn 0. 4 12. 0 Nonwoven 0. 3 4. 8 Felted Fabrics 4. 0 25. 5 Water Use Maximum, gal/ lb of production 78. 9 60. 9 45. 2 19. 5 66. 9 9. 9 111. 8 Different types of processing machinery use different amounts of water, particularly in relation to the bath ratio in dyeing processes (the ratio of the mass of water in an exhaust dyebath to the mass of fabric). Washing fabric consumes greater quantities of water than dyeing. Water consumption of a batch processing machine depends on its bath ratio and also on mechanical factors such as agitation, mixing, bath and fabric turnover rate (called contact), turbulence and other mechanical considerations, as well as physical flow characteristics involved in washing operations. These factors all affect washing efficiency. In general, heating, wash, and dyebaths constitute the major portion of energy consumed in dyeing. Washing and rinsing operations are two of the most common operations in textile manufacturing that involve significant water consumption. Many processes involve washing and rinsing stages. To grow the fiber for one cotton diaper requires 105. 3 gallons of water, one T-shirt needs 256. 6 gallons of water, one bath towel needs 401. 4 gallons of water, a man's dress shirt requires 414. 5 gallons of water, and 987 gallons of water are required for one pair of jeans. An average integrated textile mill produces 15 tons of finished cloth per day. It uses a total of approximately 3,840 cubic meters of water per day, including 1,680 cubic meters for finishing and processing, another 960 cubic meters for steam generation, and an 3 Source: Sustainable Planet: Solutions for the 21st Century, â€Å"Cleaning the Closet: Toward a New Fashion Ethic,† Juliet Schor, November 2002; http://www2. bc. edu 4 California Cotton Ginners and Growers Associations, Cotton Facts, http://www. ccgga. org e-mail: nreddy. [email  protected] com D. Narasimha Reddy 7/11 equivalent volume for serving the workers colony and other domestic uses of water. The water used for finishing and processing results in contaminated liquid effluent of approximately 1,500 cubic meters per day. 5 In Tirupur, annually the textile industries alone utilize around 28. 8 billion litres of ground water. 6 An estimated 70 percent of textile effluents and 20 percent of dyestuffs are still dumped into water supplies by global factories. Energy Consumption Textile manufacturers use energy as a raw material input to the manufacturing process or for some other purpose usually referred to as non-fuel use. Electricity consumption is increasing in textile mills. Textile manufacturers have to deal with rising energy supply costs. Dow Chemical Co. nd DuPont both recently announced they're raising prices on nearly everything they sell, from chemicals used in bathroom cleaners to freezer bags and kitchen counter tops, because of high raw materials costs. Testifying before Congress in October, 2005, Dow CEO Andrew Liveris said high prices for natural gas that Dow and other companies use for both fuel and raw materials have rendered â€Å"the entire U. S. chemical industry uncompetitive†. â€Å"We simply cannot compete with the rest of the world at these prices,† Liveris said, adding that Dow is shifting some work overseas. â€Å"It undermines all U. S. manufacturing, because we supply all of U. S. manufacturing. † Raw materials and energy account for 50 percent of Dow's costs today, Liveris said. Energy costs were also a factor in layoffs at a Hanes Dye and Finishing plant in WinstonSalem and a Klaussner Furniture plant in Robbins, in Moore County in US. â€Å"China was the big reason, but energy costs make it difficult to compete in the global market,† said Mike Vaughan, vice president of operations and general manager for Hanes. Vaughan said the company uses a significant amount of natural gas to operate the machinery at its facilities. In the past three years, he said, the costs have tripled. 7 In Indian textile industry, energy accounts for an estimated 12%-15% of total cost of production. It was estimated that the energy saving potential is as high as 23%. 8 The Textiles Committee has taken up a programme to help processing units in Tirupur reduce their energy costs. Committee sources told The Hindu9 that three small-scale dyeing units, that were members of the Mannarai Common Effluent Treatment Plant (CETP), had been selected for this purpose. The project has three phases. This project Pakistan: Environmental Impact of Cotton Production and Trade, Tariq Banuri, Copyright  © 1999 International Institute for Sustainable Development, Canada 6 Ibid 2 7 http://www. newsobserver. com/102/story/374287. html, 16th March, 2006 8 http://www. renewingindia. org 9 The Hindu, 22nd January, 2004 e-mail: nreddy. [email  protected] com 5 D. Narasimha Reddy 8/11 was taken up in association with the School of Energy of the PSG College of Technology, Coimbatore, under the cluster development programme of the committee. Sources explained that power, steam and water consumed by these units for processing one kg of fabric were estimated. During the first phase, energy auditing had been carried out in the three units. The energy consumption and the actual requirement were estimated in each of the participating units. Under the second phase, the areas that required â€Å"corrective action† were identified. Measures that had to be taken by the units and the cost implications were also recommended to them. Growth in artificial fibre over natural fibre Fibres are transformed into yarn through spinning for natural and blended yarns or drawing and texturising for synthetic filament yarn production. Yarn is weaved into cloth. The process of fabric formation or weaving comprises preparatory activities followed by actual weaving on the loom. The preparatory process includes winding, warping, sizing, drawing-in and denting. The sheets of yarn thus prepared are then converted into fabric on the looms. This weaved cloth or fabric is stitched into garments or sold in other forms of finished textiles. These stages of manufacture have various levels of automation possible as an improvement from the basic process. Textile fibres are predominantly of two types – natural and manmade (see figure ‘Basic Threads’). Based on the source, natural fibres, in turn, can be those derived from animals, vegetables or minerals. On the other hand, manmade fibres are produced in the fibre form by application of mainly chemical processes on the naturally occurring substances (like hydrocarbons). The textile industry uses vegetable fibers such as cotton, animal fibers — such as wool and silk, and a wide range of synthetic materials such as nylon, polyester, and acrylics. The production of natural fibers is approximately equal in amount to the production of synthetic fibers. Polyester accounts for about 50% of synthetics. Manmade fibres fall in two categories – synthetics and cellulosics. Synthetic fibres are primarily made from petrochemicals whereas cellulosics are mainly regenerated wood pulp with chemical and physical treating. These fibres can be either long, highly strong yarn called filament yarn (which is oriented and fully drawn and is straight) or in staple form (much smaller in length and crimpy like natural fibres). Filament yarns are woven or knitted as they are. They are also woven into fabrics of textured yarn by combining with other types of filament yarns, twisting yarns and texturing in accordance with the aim of the product. The filament yarns are processed into circular, triangular, oval, hollow and other cross-sections that have even better properties. The staple fibres can be easily blended with other types of fibres. They are woven into fabrics by blending with cotton, wool and linen fibres to suit the aim of the product. e-mail: nreddy. [email  protected] com D. Narasimha Reddy 9/11 The principal manmade fibres include polyester, nylon, acrylic and viscose. Chemically, polyester (or many esters) is primarily a family of polymers wherein the monomers belong to the category â€Å"esters†. The most commonly used polyester is the polymer of diglycol terephthalate and is called polyethylene terephthalate (PET). Nylon is a group of polymers, which can be classified as polyamides. Today several types of nylon are produced with properties tuned to meet customer specifications. The most commonly used ones are nylon-6 (which is manufactured from caprolactam) and nylon66 (made from adipic acid and hexamethylene diamine). The special characteristics of manmade fibres combined with availability and cost factors have seen an enormous increase in their use in the global textile industry. Fibres consumption (and consumption of related goods) has been growing at an astonishing rate. Consumption per capita of fibres has been growing steadily passing from 3. 7 kilos in 1950 to 9 kilos in 2002. The growth of manmade fibres in the textile industry has been phenomenal. Production of artificial fibres outnumbers natural fibres since the beginning of the 1990s. In 2002, natural fibres production was at 22. 5 million tons against 33. 6 for man made fibres. Table 3: World fibre production/Consumption per capita10 Year Natural Manmade TOTAL Population Consumption * ‘000 billion** kg / capita tons 2002 22. 463 33. 657 56. 120 6,23 9,0 2000 21. 504 31. 147 52. 651 6,08 8,7 1990 21. 460 19. 380 40. 840 5,28 7,7 1980 15. 227 14. 301 29. 528 4,46 6,6 1970 13. 484 8. 394 21. 878 3,71 5,9 1960 11. 607 3. 367 14. 974 3,04 4,9 1950 7. 723 1. 681 9. 404 2,56 3,7 * Ramie, flax, hemp, jute, sisal and coir (fibre prepared from the husk of the coconut) not included. * World population Comparing the domestic consumption patterns of fibres in India and China, two of the largest textile players on the global market, the imbalance is evident. In India, the textile industry covers a wide range of economic activities and has a significant role in the economy of the c ountry. In 2003, it was growing at the annual rate of 5%. In the meanwhile, the per capita consumption of textile fibre in India is one of the lowest (2. 5 kg) in the world. In China, the consumption of textiles is booming. Synthetic fibre yarns are in the top fifty import commodities. In 2003 China imported 710,000 tons of cotton yarn and almost all Source: 2003/feb/25bud20. htm 10 www. indo-rama. net/FiberYear2002. pdf; www. rediff. com/money/ e-mail: nreddy. [email  protected] com D. Narasimha Reddy 10/11 luxury yarns and fibres are imported. During the same year, China's quantity per capita of processed chemical fibre reached 10 kg, much higher than the world's average. China's textile sector is predicted to achieve a 6. 0% growth to take its total fibre consumption to 14. 0 million tonnes by 2005 and its per capita fibre consumption from the 2001 level of 6. 0 kg to 8. 0 kg. In India, as yet there is no effort to quantify the overall environment impact of wet processing of ma n-made fibers, especially with respect to chemical components, processing formulations and the effluent produced from the process. It is known that pretreatment of cellulosic textiles is characterized by high consumption of chemicals, water, and energy along with great discharge of waster water. This is mainly due to carrying out pretreatment operations on separate steps with repeated washing operations after each step. Conclusion Clothes and other textiles can affect the environment to varying degrees throughout their life cycles. Before textiles reach the consumer, they have gone through many different chemical processes. They may be treated with chemicals to dye them, make them more hardwearing or wrinkle-resistant, or less flammable. Some of these chemicals are carcinogenic or may cause harm to children even before birth. Others may trigger allergic reactions in some people. Some flame retardants that are used in certain textiles contain organic bromine compounds that are persistent (break down very slowly in the environment). The use of some dangerous chemicals in textiles is restricted such as azo dyes and formaldehyde. All textiles processes have an impact on the environment. The industry uses large amounts of natural resources such as water, while many operations use chemicals and solvents. All companies use energy, produce solid waste, discharge effluent and emit dust, fumes, etc to the atmosphere. Many textiles companies are located in rural areas where environmental protection assumes significance. While companies in developed countries are faced with increasingly stringent legislative controls and rising water and other raw material costs, their competitors in developing countries are getting away by externalising the environmental costs. Efficient and effective use of raw materials and improved process operations are vital for Western companies to remain competitive. Pressure is also being exerted by suppliers and customers on such companies to reduce their environmental impact. Environmental aspects in the textile industry are typically addressed at the corporate level, and the environmental costs are viewed as corporate overhead, but in general not discussed at the national level. A more efficient compliance with proper environmental guidelines is required for significant cost reduction on environment. e-mail: nreddy. [email  protected] com D. Narasimha Reddy 11/11 Environmental issues can no longer be ignored by the textiles industry and the government. Indian textile industry should realize that to remain competitive operating costs have to be reduced and environmental compliance has to be increased. Government should also integrate environmental goals into the national textile policy, and cannot have independent growth strategies, as environmental costs are proving to be a drag on growth and development. The textile industry in Tirupur was expected to grow to achieve the targetted textile product export of US$ 50 Billion by the year 2010. But, such growth is now greatly hampered due to immense environmental damage caused to the Noyyal river, ground water system, and agricultural production, by the textile wet processing industries in Tirupur. 11 All these factors mean that environmental issues should be an essential part of textile growth policies. For Indian textile sector, the main drivers for environmentally benign growth can be: †¢ Growth of handloom sector †¢ Competition †¢ Pressure exerted down the supply chain by the consumer †¢ Reducing production costs †¢ Meeting current and anticipated legislative requirements †¢ Concern for the global and local environment In India, a comprehensive approach has not been undertaken before on environmental impacts of textile manufacturing and has never previously been associated with textile production and use. A comprehensive analysis of the environmental impact of textile manufacturing activity should be done, which includes an analysis of the degradation by air pollution, wind, water and other agents. A complete survey of how developments in the textile industry and consumers of its products have affected the environment in the past needs to be taken up. This should also cover the most recent solutions adopted by the industry to alleviate the problems. This is important given the high textile production targets post 2005, and the ways in which the industry is responding to the environmental challenge. It will help the national textile policy and the growth of textile industry as well. 11 Ibid 2 e-mail: nreddy. [email  protected] com

Friday, September 13, 2019

Strategic Management (Shouldice Hospital) Case Study

Strategic Management (Shouldice Hospital) - Case Study Example They were supported to move around the halls and conduct conversation with the other patients as well as the surgeons. With the view of motivating the patients to walk, the steps were made with smooth inclination connecting the floors. The rooms were designed at the comfort of the home. The carpets were placed so that the patients didn’t feel that they are at hospitals. It can be worthwhile mentioning that the case study of Shouldice has been the perfect example of the well-built as well as service delivery procedures that have been quite focused. Over and above providing the quick, cheap and quality surgery, the hospital was also successful at conveying comfortable as well as exceptional experience to the entire set of patients coming for their treatment. There are multitudinous reasons behind the success of the hospital ranging from the surgery techniques to pleasant environment. The patients at the hospital were able to enjoy their meals in the general cafeteria to get the chance of interacting with the patients as well as the doctors. The treatment that is post-operative was sought to be the most significant factor of treatment that the patients receive. For the mental and physical recovery, no television or telephone were kept in the rooms and the patients were further motivated to walk. It is worthwhile to mention that the target segment of the hospital has been the healthy patients who were detected to recuperate fast. These patients had primary inguinal, one of the forms of hernia. Those patients possessing health problems other than hernia were not treated in the hospital. The logic behind admitting the patients those who were at a controllable stage was that they would get back to the normal stage quite fast... It can be worthwhile mentioning that the case study of Shouldice has been the perfect example of the well-built as well as service delivery procedures that have been quite focused. Over and above providing the quick, cheap and quality surgery, the hospital was also successful at conveying comfortable as well as exceptional experience to the entire set of patients coming for their treatment. There are multitudinous reasons behind the success of the hospital ranging from the surgery techniques to pleasant environment. The patients at the hospital were able to enjoy their meals in the general cafeteria to get the chance of interacting with the patients as well as the doctors. The treatment that is post-operative was sought to be the most significant factor of treatment that the patients receive. For the mental and physical recovery, no television or telephone were kept in the rooms and the patients were further motivated to walk. It is worthwhile to mention that the target segment of th e hospital has been the healthy patients who were detected to recuperate fast. These patients had primary inguinal, one of the forms of hernia. Those patients possessing health problems other than hernia were not treated in the hospital. The logic behind admitting the patients those who were at a controllable stage was that they would get back to the normal stage quite fast and thus other patients of hernia could have been treated at a greater frequency. Other numerous benefits have been associated with the admission of the healthy patients in the hospital.

Thursday, September 12, 2019

HR Training and Development Essay Example | Topics and Well Written Essays - 750 words

HR Training and Development - Essay Example Online job portals are the best solution which benefits both the employer and employee in landing on the right job. Today internet is one of the most widely used tools to search and post jobs online. Many companies still choose to advertise the open vacancy in the newspapers but most of the organizations are switching towards online job portals. The positive impact of an online job portal has been emphasized as is it has completely changed the way a job seeker searches for jobs and the way in which companies recruit employees. According to the latest research, there are more than 2000 online job search websites that exist today and it is also evident that job placement through online job portals have a very high ratio in the current time. Online job portals help the companies to advertise their job openings globally and the organization gets the chance to explore global talent for selection whereas job seekers can explore global opportunities and hence it creates a gateway for them t o excel in their career (Richardson 2010). The positions of Human Resource Manager and Human Resource Recruiters on careerbuilder.com and monster.com website perfectly match the criteria of my skills sets. These include the Essential Job responsibilities, requirements and other educational requirements of these posts. There are many online job advertisement portals available over the internet that provides different resources to filter the right candidate. Career building websites provide different questions, articles and links for effective interviewing of the candidate and also online screening and test to chop down to the right candidate. From the job seekers point of view career building websites provide articles and links for effective resume writing and cover letter according to the company’s requirement. Other tools provided by career builders are training resources for candidates that include different training modules in the technical or management field. These resou rces help both the job seeker and the job advertisers to effectively pursue their goals in a short amount of time (Handler 2008). The advantage from the point of view of an organization for online job postings on different job website is the cost factor. The advertisement cost is almost reduced to 90% from the traditional advertising methods. E-Recruitment allows the employees to interact with the candidate in a really short time and the employer can post a job on the website in less the 20 minutes with no limit size. Company’s online job posting can stay live on the website for complete 30 days and the hiring process is 70% faster than traditional hiring. Since the website is viewed globally therefore the audience exposure is wider and the process is easy. Job seekers can have a wider approach towards their career search and they can explore the career resources on the websites for effect resume building and cover letters for the company. Job seekers can view the complete jo b description before applying for a job and they can also filter the job from city to salary range and also according to the technical skills they possess (Handler 2008). Online job posting has become a wide choice by most of the companies to publish their jobs online. It has been observed that many companies now post available vacancies online rather than using traditional media. Hiring the right candidat

Wednesday, September 11, 2019

Chapter 9 Essay Example | Topics and Well Written Essays - 500 words

Chapter 9 - Essay Example The environment itself as the public sees it is what is around us. We see that we have a responsibility not to destroy it. It is where we live and what supports our life and all of the life around us. We also have a social responsibility but it is different in many ways. 2. Everywhere there is an abundance of the leftovers of business and our town is no exception. This includes wood, cans, paper, and plastic to name a few. There is smoke from smokestacks and pollution from vehicles getting there and transporting. There are many recycling efforts in play especially for cans, paper and plastic. Most of the companies that bring things in on pallets allow people to use the wood for projects and for burning if they wish so that helps. The air pollutions does not seem to be dealt with a lot though the water is being recycled as much as possible. 3. The issue of global warming is tremendously large. There are many things affecting it. Those countries that were not industrialized before are and the carbon products they are putting in the air are quite large. The rain forests that have filtered the air for generations are being removed for people to live there. There are more cars on the road in more countries than ever before. The ice sheets are melting, the permafrost is melting. It is a giant problem.

Tuesday, September 10, 2019

Nursing and Human Resource Sector of the Health Care Industry Assignment

Nursing and Human Resource Sector of the Health Care Industry - Assignment Example The present research has identified that there is a rising cost of providing healthcare to over 230,000 individuals, a task that is making hard for the health care system to retain and attract employers who are discouraged by the premium costs. The employers are facing the effect of having to reduce or absolutely not offering any health care benefits to the employees. The Mercy Health plans are also finding it very difficult to get a local health plan for the employers. There is also the issue of competitors who offer national health plans and worse, they have a large share of the market. As such, the mercy health plan has to strategize themselves so as to face the existing competition in the market. Among the solutions considered by the Mercy Health Plans in the face of the problem of attracting employers into their health plans, they have decided to attract employers through offering them more attractive health plans that apply to the long-term relationship they have with their emp loyee. They encourage the senior management teams of the employers to take up their health plans in order to solve this problem. This is in opposition to the selection of short-term health care plans by the senior management. This is because the short-term health plans tend to be a source of cost shifting solution to the employer and mostly offered by consumer-directed programs for health benefits. Further, the mercy health plan realizes that they have to design a health program that would cover the overall health of the entire population. This includes the consumers that do not have a high risk of healthcare complications and their probabilities of getting sick is also low. As such, it is possible that the Mercy Health plan can reduce the cost of health and attract more employers.